Mould Standard Scope is enlarged continuously

Hits: Date:2011-9-22 Font Size:14px 12px
Standard mould to adapt to the needs of the production of the specialization of large quantities of socialization, growing heterogeneity. At the same time, hot runner standardization supply is becoming not to be ignored in the industry is an important part. China injection mold frame production factory is numerous, estimates that China had more than 40......

Standard mould to adapt to the needs of the production of the specialization of large quantities of socialization, growing heterogeneity. At the same time, hot runner standardization supply is becoming not to be ignored in the industry is an important part.
Traditional ChanXu standard mould
Injection mold frame
China injection mold frame production factory is numerous, estimates that China had more than 40, most of them lack of capacity, has sets of thousands more in less than 10 enterprise ability to families, with the dragon remember group company, dongguan Ming the steel die products Co., LTD, desheng company and guangdong shunde new strong mold production scale of company belongs to the first square, each enterprise injection mold frame annual output value is more than one hundred million yuan (RMB, similarly hereinafter), some can reach several hundred million yuan. Suzhou steel company, shenzhen north village enterprise, shenzhen and south longhua industrial Co., LTD, shenzhen and dragon mechanical mould Co., LTD, kunshan cuhk mold frame Co., LTD is the second square formation, injection mold frame annual output value of more than 10 million yuan. The two blocks were more than ten enterprises injection mold frame annual output value can reach more than 20 one hundred million yuan, accounting for more than 90% of the country's total output. According to the need for, now the country need about injection mold frame reaches more than one hundred million yuan. But the domestic market does not reach the scale, this is mainly injection mold home-grown since the higher percentage and export with more. North China and the Midwest, because professional degree is low and the historical causes of some old ideas have not yet fundamental change, so the mold production unit of injection mold frame needed most is still produced since with few outsourcing. At present the market mainly injection mold frame in the pearl river delta area, followed by the Yangtze river delta; Just as in guangdong province, the focus, followed by zhejiang, jiangsu, Shanghai, shandong province.

Because the user to mold production cycle mold the requirements of short, so more and more production large and medium-sized injection mold frame enterprise already began to dig the cavity and play deep hole and deep processing direction, now already have gained good effects.

Putting the ejector
Due to the complex and the price is low, process so putting the ejector specialized production in many of the best in the standard mould, its use coverage also reached almost 100%. Japanese dish industry (dalian) Co., LTD. Is China's production of the biggest push rod tube enterprise, the product quality excellent, the price is expensive, a large number of exports. Guangzhou strength standard mould company with an annual output of 30 million pieces, is the ability of domestic enterprises in the largest, production of push rod push tube variety specification and class more enterprise, can satisfy the needs of different levels, and some finished export. Guangzhou donghua mould factory, zengcheng city, rich and powerful push rod mold industry Co., LTD, anhui leader of mould the standard, hedong district zhenhua standard mould factory and tianjin China objects standard mould Co., LTD. Have the ability of the annual output of 10 million or so. The above seven enterprises production accounts for about 80% of the national total, putting the ejector ChanXu basic balance market. Production enterprise already noticed to improve the process, and to increase the variety, improve product quality and grade and further development of specialized production, especially the importance of one of the top several enterprise, all are trying to transform the technology with advanced technology to improve competition ability.
In addition to the cold die wearing, injection mold frame and putting the ejector besides, elastic elements using coverage is very high also, almost 100%. However, the gas spring (such as the nitrogen cylinder) basically are imported, no standard for domestic, are test-manufacturing in. In addition, the template modular, guide a, standard die and punch, the gate of a 14 standard mould home also has some enterprise production, but less variety specification, using coverage, produced for low.
Mould of hot flow path standardization

The production of hot runner, especially with the traditional terms than the cold runner, cost and time of delivery will undoubtedly be more important.

With the development of technology in production, processing or order processing, almost completely customizable hot runner system of production cost reduction and fast delivery possible. In the past, and many of the variables that hot runner design automation software is very slow, ineffective and difficult to maintain. Limit the size and mold frame hot runner and mould related size of the standardization, make a design automation becomes reality. Recently, the company launched the new Emile heskey configurable hot runner system, make the product from design to construction of the complete cycle shortens to 3-5 weeks, such delivery in the original customized under the simple system is hard to imagine. And hot runner prices also have significantly reduced. And all this, all benefit from the most parts of system of standardization.